| XBJXJ series cycloid pin gear reducer is a kind of machine that realizes deceleration according to the principle of planetary transmission with small tooth difference. The machine is divided into horizontal, vertical, dual-axis and direct-connected assembly methods, and is used in metallurgy, mining, construction, chemical, textile, light industry and other industries. |
| Performance characteristics: |
| 1. The cycloid reducer has a large reduction ratio and high efficiency: the reduction ratio of the first-stage transmission is 9 ~ 87, the reduction ratio of the two-stage transmission is 121 ~ 5133, the multi-stage combination can reach tens of thousands, and the pin tooth meshing system sets the rolling friction. There is no relative sliding on the meshing surface, so the first-stage deceleration efficiency is 94%. |
2. The pin gear reducer runs smoothly and has low noise: during the operation, the number of teeth that are simultaneously contacted is large, the coincidence is large, the operation is stable, the overload capacity is strong, the vibration and noise are low, and the models of various specifications have low noise.
3. Reliable use and long service life: The main parts are hardened by high carbon alloy steel (HRC58-62), and then finely ground, and the cycloid teeth and the needle tooth sleeve mesh and pass to the needle teeth to form rolling friction and friction. The coefficient is small, so there is no relative sliding in the meshing area, and the wear is extremely small, so it is durable.
4. Compact structure and small volume: Compared with other reducers of the same power, the weight and volume are smaller than 1/3. Because it is a planetary transmission, the input shaft and output shaft are on the same axis to obtain the smallest possible size.
| Technical Parameters: |
| Power: 0.37KW ～ 55KW |
Torque: 150N · m ～ 20000N · m
Transmission ratio: single stage: 9-87 double stage: 121-7569 third stage: 2057-658503